UAE: 5 ways to prevent your car engine from overheating this summer

In warm weather, engine temperatures can rocket from their normal range of 75 to 105°C to as high as 130°C. Overheating can occur, causing mid-journey driving issues and potentially expensive or even irreparable damage.

Signs that your engine is overheating include:

Here's how to deal with warning signs or even prevent them so summer road trips are as stress-free and pleasant as possible.

1. Carry out a coolant flush

Over time, everyday dirt and debris from the road can build up and block your engine's cooling system, preventing it from managing internal temperatures. A coolant flush drains these contaminants from your engine, making it a crucial procedure for maintaining a healthy vehicle and avoiding radiator clogs, engine corrosion, leaks, thermostat damage, and water pump issues.

Your car or motorbike manufacturer's manual should offer specialist advice on when and how to do a coolant flush for your model. But as a rule, you should try to carry out a flush every two years or every 40,000 miles—whichever comes first.

2. Turn off the air and switch on the heat (cars only)

To cool your car's engine, you may need to pump warm air into your passenger compartments.

This process begins by turning off your air conditioning. It may feel a little uncomfortable, especially when driving in the summer heat, but using the AC puts extra strain on your engine and harms its ability to cool.

In turn, switching on your heating and blowers actually transfers heat away from the engine. It also opens up your heater core, a smaller version of the radiator that sits towards the front of your car, giving your engine the chance to draw in fresher, cooler air and operate at a safer temperature.

3. Rev your engine or pull over

If your journey involves regular stops and starts due to traffic or stoplights, it's a good idea to rev your engine while stationary. Revving helps to pump water through the radiator and speed up the fan (if controlled by the engine), cooling internal temperatures.

But once you begin slowly moving again, try to avoid riding your brakes—brake drag further increases the load on your engine. Instead, let a larger gap open up between you and the vehicle in front before you move forward.

If none of these steps help, and your engine temperature is climbing out of control, pull over to the side of the road. Then, open your car or motorbike's hood or bonnet to let heat directly escape out of the engine bay.

However, under no circumstances should you then touch any internal components, particularly the engine or radiator. A vehicle's water and coolant mix is pressurised when hot, and opening the radiator cap can cause the coolant to spray out and cause serious skin burns. If you must open it, wait until your engine has completely cooled.

4. Call a garage or mechanic

While these tips and quick fixes can make a difference, when overheating persists, your engine may be suffering from a deeper problem that requires specialist help.

If you spot your engine gauge spending most of its time in the red zone, pull over and call a mechanic. You can use trusted international workshop locator tools to find your nearest engine repair and service expert, even if you're far from home.

Then, depending on your vehicle's condition, drive to the workshop or request a tow truck to protect your engine from any further damage. The mechanic will be able to diagnose the issue and hopefully get you back on the road ASAP. They should be able to advise you on preventative oil measures too.

5. Choose a quality engine oil

Modern engines operate at higher temperatures and with more moving parts than ever before. To function properly, these moving parts need to be lubricated to reduce friction, while dissipating heat to protect the engine's performance.

High-quality engine oil for both cars and motorcycles can help to fight excessive engine temperature by regulating and absorbing heat, defending critical components from damage, and reducing fuel consumption. This is particularly important during summer—engines require a thicker, heavier-weight oil during the warmer months as heat can thin the oil out.

ALSO READ:

• UAE: Checklist to prevent cars from catching fire in summer

• UAE travel: Planning a road trip this summer? Police warn of fines for overloading vehicles

Fortunately, multi-viscosity oils can adapt to year-round temperatures by flowing well in the winter, and then thickening up and protecting in the summer. For instance, a 10W40 oil has a viscosity grade of 10 in lower temperatures and 40 in higher ones.

You must choose the correct oil and viscosity for your model to avoid further vehicle issues. Before you buy, use tools such as a lubricant recommender to find a product that keeps your engine safe and running smoothly.

- Fausto Lupone

• Dubai